中国(上海)自由贸易试验区临港新片区老芦公路536号
021-57525860·13162862074
15 / 16 · 产品线

马弗炉Muffle Furnaces

箱式电阻炉(马弗炉)采用陶瓷纤维炉膛与硅钼/电阻丝加热元件,最高温度 1000–1700℃,用于灼烧、灰分测定、烧结、熔融与热处理。

2款机型
0类型
GBISO · ASTM
48h技术响应
2 款机型
共 2 款机型 · 产品线⚡ 快速选型向导⌕ 产品选型中心¥ 报价申请与选型方案▤ 选型方案↓ 选型方案书
没有匹配的机型,换个关键词或直接联系工程师。

技术资料

六份技术文件,覆盖原理到验收

行业案例

典型检测工况,以及本产品线对应的解决思路。

01
工况材料分析
检测难点灰分/灼烧失重
解决方案815℃ 恒温,GB/T 2295
结果出具检测报告;按标准核验示值误差与重复性。
02
工况陶瓷烧结
检测难点氧化铝试样
解决方案1400℃ 程序升温
结果出具检测报告;按标准核验示值误差与重复性。
03
工况金属热处理
检测难点小型工件淬火加热
解决方案1200℃,K 型热电偶
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

产品原理

从物理效应到测量结果,讲清设备的工作原理。

压头物镜试样光源数据处理
原理要点
  1. 电流通过电阻元件产生焦耳热,炉膛以陶瓷纤维保温,配合 PID 程序控温实现设定的升温曲线
  2. 热电偶实时反馈炉温,固态继电器调节功率占空比
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

动图流程

标准作业顺序,并标出最易引入误差的关键步骤。

01装样(坩埚/托盘) →
02设定升温程序 →
03升温至设定温度并保温 →关键控制点
04程序结束自然降温 →关键控制点
05取出称量/取样

参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

标准规范

涉及方法、检定与验收的国家标准与国际标准。

标准编号适用范围
GB/T 30435电热干燥箱及电热鼓风干燥箱(同类电热设备通用要求)
—JJF 1101 环境试验设备温度参数校准规范
GB/T 212煤的工业分析方法(灰分、挥发分)
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

选型方案

按工况对应推荐系列,再与工程师确认具体配置。

工况推荐系列选型理由
按最高温度选 1000℃(电阻丝)/1200℃/1400℃(硅碳棒)/1700℃(硅钼棒)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
按炉膛容积选 3/8/12/30L以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
需气氛保护选通保护气或真空炉以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
需快速升降温选陶瓷纤维炉膛。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

检测方法

取样、制样、检测、复核与验收判据。

标准作业流程
  1. 用标准热电偶或温度巡检仪在炉膛中心与四角布点,评价温度偏差与均匀性
  2. 定期检查加热元件电阻与炉膛裂纹
验收判据

用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。

注意事项

班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
咨询热线