中国(上海)自由贸易试验区临港新片区老芦公路536号
021-57525860·13162862074
11 / 16 · 产品线

熔点仪Melting Point Apparatus

毛细管法熔点仪与显微热台熔点仪,用于药品、化工原料、香料、油脂等物质的熔点、熔距与滴点测定,是药品与化学品质量控制的基础仪器。

29款机型
1类型
GBISO · ASTM
48h技术响应
29 款机型
共 29 款机型 · 产品线⚡ 快速选型向导⌕ 产品选型中心¥ 报价申请与选型方案▤ 选型方案↓ 选型方案书
没有匹配的机型,换个关键词或直接联系工程师。

技术资料

六份技术文件,覆盖原理到验收

行业案例

典型检测工况,以及本产品线对应的解决思路。

01
工况制药
检测难点原料药熔点
解决方案毛细管法,±0.1℃
结果出具检测报告;按标准核验示值误差与重复性。
02
工况化工
检测难点聚合物软化点
解决方案程序升温 0.5℃/min
结果出具检测报告;按标准核验示值误差与重复性。
03
工况食品
检测难点油脂熔点
解决方案滑动法,三平行样
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

产品原理

从物理效应到测量结果,讲清设备的工作原理。

压头物镜试样光源数据处理
原理要点
  1. 样品装入毛细管置于可控升温的加热块中,以规定升温速率加热,通过目视/光电/视频图像识别记录初熔与终熔温度
  2. 显微热台法则在偏光显微镜下观察晶体熔化过程,可同时观察晶型变化
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

动图流程

标准作业顺序,并标出最易引入误差的关键步骤。

01装样并压实 →
02设定起始温度与升温速率 →
03插入加热块/热台 →关键控制点
04自动或目视记录初熔/终熔 →关键控制点
05计算熔距 →
06打印结果

参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

标准规范

涉及方法、检定与验收的国家标准与国际标准。

标准编号适用范围
GB/T 617化学试剂 熔点范围测定通用方法
—《中国药典》通则 0612 熔点测定法
JJG 701毛细管法熔点测定仪检定规程
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

选型方案

按工况对应推荐系列,再与工程师确认具体配置。

工况推荐系列选型理由
常规质控选带自动视频识别、可同时测 3–4 个样品的毛细管熔点仪以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
需观察晶型与热转变选显微热台以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
微量/高价样品选微量熔点仪以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
需测滴点选专用滴点仪。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

检测方法

取样、制样、检测、复核与验收判据。

标准作业流程
  1. 用标准物质(如咖啡因、磺胺、香草醛)校验示值误差
  2. 升温速率对结果影响显著,须按标准规定速率(如 1.0℃/min)测定并记录
验收判据

用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。

注意事项

班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
咨询热线