点击查看大图RQP-408
RQP-408正置金相显微镜适用于对透明、不透明物体的显微观察,学校、科研、工厂等部门.。
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
RQP-408正置金相显微镜适用于对透明、不透明物体的显微观察。本仪器配有落射照明、透射照明系统、平场消色差物镜,图像清晰,衬度好。同时配有偏光装置,是金属学、精密工程学、电子学等研究的理想仪器,适用于学校、科研、工厂等部门。
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点物镜与目镜两级放大,倒置式机型将物镜置于载物台下方,适合未经镶嵌的块状试样数值孔径决定分辨率(d=0.61λ/NA)配合柯拉照明获得均匀视场与真实反差常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
技术规格
| 技术规格 | 型号 | ||
|---|---|---|---|
| RQP-408 | RQP-408T | ||
| 观察头 | 30°铰链式双目头(50mm-75mm) | ● | |
| 30°铰链式三目头(55mm-75mm) | ● | ||
| 目镜 | WF10×/18mm | ● | ● |
| WF10×/18mm,带0.1mm十字分划板 | ● | ● | |
| 转换器 | 四孔转换器 | ● | ● |
| 物镜 | 195平场金相物镜:4×/0.1W.D.25mm、10×/0.25W.D.11mm、 20×/0.4W.D.9mm、40×/0.6W.D.3.8mm | ● | ● |
| 平台 | 双层移动平台 | ● | ● |
| 平台尺寸:140mm×140mm | ● | ● | |
| 移动范围:75mm×50mm | ● | ● | |
| 滤色片 | 插板式滤色片(绿色、蓝色、黄色) | ● | ● |
| 调焦 | 粗、微动同轴调焦机构 微动格值0.002mm | ● | ● |
| 集光镜 | N.A.1.25阿贝聚光镜带可变光阑及滤色片 | ● | ● |
| 光源 | 落射照明:卤素灯AC85V-230V, 6V/20W,亮度可调节 | ● | ● |
| 透射照明:卤素灯AC85V-230V, 6V/20W,亮度可调节 | ● | ● | |
| 偏光装置 | 检偏镜可360度转动,起偏镜、检偏镜均可移出光路 | ● | ● |
| 检测工具 | 0.01mm测微尺 | ● | ● |
| 可供附件 | 专业金相图像分析软件 目镜:WF16× 物镜:50×(s) 80×(s) 100×(s)oil 铰链式双目、三目头(48mm-75mm) 130万、200万、300万、500万像素CMOS电子目镜 无应力物镜:100×(s)Oil 摄影装置及CCD接口0.5×、0.57×、0.75、彩色1/3寸 CCD 520条线 | ||
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由常规金相选三目倒置(可接相机)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需评级出报告选配图像分析软件与专业物镜(平场消色差)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。现场大件选便携式或体视以上参数仅供参考,最终配置、价格与交期以正式报价单为准。透明薄膜、纤维选偏光以上参数仅供参考,最终配置、价格与交期以正式报价单为准。尺寸测量选工具显微镜。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程放大倍数用标准测微尺校准,分辨率用分辨率板验证,视场均匀性用毛玻璃目视检查图像分析系统的长度测量需用标准刻线尺标定像素当量验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
常见问题
RQP-408 的报价与交期是多久?
RQP-408 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。