点击查看大图RQMWF-003
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
微机控制往复磨损试验机主要用于球片摩擦副的水平往复摩擦磨损试验,通过更换夹具也可用于其它形式摩擦副的往复摩擦磨损试验。
产品特点
它可在干摩擦、滴油润滑及有油润滑的状态下进行实验,以测定不同材质及不同表面处理的摩擦副材料的摩擦磨损特性。适合大专院校、科研院所及质量监督检验等部门使用。
微机控制往复磨损试验机主要技术指标
2.9计算机设定频率、试验时间、试验次数等参数,实时绘制摩擦力试验曲线;可存盘、打印、输出等。
可根据用户需求量身定做。
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点伺服电机(电子式)或液压系统(液压式)驱动横梁对试样施加轴向载荷,负荷传感器与引伸计同步采集力值与变形量,软件按标准计算屈服强度 ReH/ReL、抗拉强度 Rm、断后伸长率 A、断面收缩率 Z 等指标,并绘制力-位移/应力-应变曲线常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQWDW-10RQWDS-10RQWDS-01DRQWDW-01D获取报价 →参数对比 →咨询工程师 →
技术规格
| 1最大试验力 | 30N |
|---|---|
| 2试验力施加方式 | 砝码加载 |
| 3最大往复试验行程 | ±25mm |
| 4试样球 | φ10 |
| 5试样片 | 60×30×3 |
| 6往复运动的实现方式 | 曲柄连杆机构及螺杆调整偏心量 |
| 7往复试验频率范围 | 0-15HZ,无级调整 |
| 8摩擦力测量范围 | ±30N |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由按最大试验力选 10kN/20kN/50kN/100kN/300kN/600kN以上参数仅供参考,最终配置、价格与交期以正式报价单为准。金属棒材、紧固件选液压万能以上参数仅供参考,最终配置、价格与交期以正式报价单为准。塑料橡胶、薄膜、细丝选电子万能(小力值高分辨率)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。按试验类型选配高温炉、低温槽、引伸计与专用夹具。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQWDW-10RQWDS-10RQWDS-01DRQWDW-01D获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程测力系统按 GB/T 16825.1 用标准测力仪分级检定,0.5 级机示值误差 ≤±0.5%、1 级机 ≤±1.0%引伸计按 JJG 762 检定横梁位移速度需定期核验验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQWDW-10RQWDS-10RQWDS-01DRQWDW-01D获取报价 →参数对比 →咨询工程师 →
常见问题
RQMWF-003 的报价与交期是多久?
RQMWF-003 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。