点击查看大图RQJC-10-JC4-10
主要用途 便携式测量读数显微镜是光学计量仪器一种,它具有结构简单、操作方便、适用范围广泛等特点,主要用途如下: 测定孔距、刻线宽度、狭缝凹痕宽度、长度、金属表面...。
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
主要用途 便携式测量读数显微镜是光学计量仪器一种,它具有结构简单、操作方便、适用范围广泛等特点。主要用途如下: 测定孔距、刻线宽度、狭缝凹痕宽度、长度、金属表面...
产品特点
一.主要用途
便携式测量读数显微镜是光学计量仪器一种,它具有结构简单、操作方便、适用范围广泛等特点。主要用途如下:
测定孔距、刻线宽度、狭缝凹痕宽度、长度、金属表面质量、纤维、织物密度、标本等。
此外,本仪器特别适合测量各种硬度计试验的压痕尺寸。
二.照明
本仪器采用了先进的LED照明系统,在野外或现场照明不便时使用。
三.主要技术参数
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点物镜与目镜两级放大,倒置式机型将物镜置于载物台下方,适合未经镶嵌的块状试样数值孔径决定分辨率(d=0.61λ/NA)配合柯拉照明获得均匀视场与真实反差常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
技术规格
| 型 号 | JC-10 | JC4-10 |
|---|---|---|
| 仪器放大倍数 | 20× | 40× |
| 目镜放大倍数 | 10× | 10× |
| 物镜放大倍数 | 2× | 4× |
| 目镜测微尺(mm) | 0~8 | 0~8 |
| 目镜线视场(mm) | 8.5 | 8.5 |
| 有效测量范围(mm) | 4 | 2 |
| 目镜测微鼓轮最小分度值(mm) | 0.01 | 0.01 |
| 测量精确度(mm) | ±0.01 | ±0.01 |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由常规金相选三目倒置(可接相机)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需评级出报告选配图像分析软件与专业物镜(平场消色差)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。现场大件选便携式或体视以上参数仅供参考,最终配置、价格与交期以正式报价单为准。透明薄膜、纤维选偏光以上参数仅供参考,最终配置、价格与交期以正式报价单为准。尺寸测量选工具显微镜。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程放大倍数用标准测微尺校准,分辨率用分辨率板验证,视场均匀性用毛玻璃目视检查图像分析系统的长度测量需用标准刻线尺标定像素当量验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
常见问题
RQJC-10-JC4-10 的报价与交期是多久?
RQJC-10-JC4-10 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。